Author [NL] [FR] [ES] [DE] [SE] [IT] [NO] [MY] Topic: VTec not working - error code 27  (Read 1963 times)

0 Members and 1 Guest are viewing this topic.

Offline fcogomezgracia

  • Crossrunner Junior
  • *
  • Posts: 2
  • Bike: Crossrunner 2013
  • City / Town: Antofagasta
  • Country: chile
VTec not working - error code 27
on: February 02, 2016, 01:11:44 PM
Dear members,

I have an issue with my bike: fuel injection light started to blink, shows 2 long blinks and 7 short blinks (error code 27). I searched in VFR forums and error 27 is related to vtec spooling valve (could be electrical, conecction or faulty valve itself). This makes sense since the Vtec is not activating, bike rides normally but not as usual over 6500 RPM's.

Unfortunatelly local dealer is not capable so before sending the bike to Santiago dealer (1,500 kms away) I wanted to check myself conections of Vtec valve/selenoid. Is there any video or diagram so I can see where is located?

thnks

Saludos from Northern Chile.


Offline Adst

  • Crossrunner Pro
  • ***
  • Posts: 223
  • Bike: Vfr800x 15 white
  • City / Town: Maidstone
  • Country: United Kingdom
Re: VTec not working - error code 27
Reply #1 on: February 02, 2016, 01:36:17 PM
sorry to hear you have problems
you might be better answered on a general VFR forum like http://www.bikersoracle.com/vfr/forum/forumdisplay.php?f=56
rather than the exclusive crossrunner only ? more usa hits too ... so later in day will be answered ..?