Author [NL] [FR] [ES] [DE] [SE] [IT] [NO] [MY] Topic: SW Motech Centre Stand  (Read 1630 times)

0 Members and 1 Guest are viewing this topic.

Offline jwmitch

  • Crossrunner Member
  • **
  • Posts: 25
  • Bike: Red Mark 2 CR
  • City / Town: Gloucester
  • Country: United Kingdom
SW Motech Centre Stand
on: July 07, 2016, 11:13:17 AM
Hi everyone,

I have just tried fitting an SW Motech Centre Stand to my 2013 Crossrunner.  There's a black M3 X 30 hex head screw that fits into the frame on the right side of the bike. The bolt supplied was a left hand threaded one, is this correct?

Cheers,

jwmitch

Online stubax

  • Crossrunner Pro
  • ***
  • Posts: 226
  • Bike: VRF800X
  • City / Town: Manchester
  • Country: UK
Re: SW Motech Centre Stand
Reply #1 on: July 07, 2016, 12:36:12 PM
Yes, when I fitted one to a 2011 model 1 bolt was indeed left hand thread.

Offline jwmitch

  • Crossrunner Member
  • **
  • Posts: 25
  • Bike: Red Mark 2 CR
  • City / Town: Gloucester
  • Country: United Kingdom
Re: SW Motech Centre Stand
Reply #2 on: July 07, 2016, 12:50:43 PM
Thanks stubax,  there was nothing in instructions advising me of the fact that the bolt was a left handed thread. I will try again tonight.

Cheers,

jwmitch

Online stubax

  • Crossrunner Pro
  • ***
  • Posts: 226
  • Bike: VRF800X
  • City / Town: Manchester
  • Country: UK
Re: SW Motech Centre Stand
Reply #3 on: July 07, 2016, 06:10:42 PM
I knew about it before fitting, can't remember if it was in the instructions or I read it on here.

 


* Recent Topics


recent