Author Plastic panel pins  (Read 5721 times)

0 Members and 1 Guest are viewing this topic.

  • Offline charlie

    • Crossrunner Pro  ‐    124
    • ***
    • Topic Author

    Offline charlie

    • Crossrunner Pro
    • ***
    • Topic Author
    • Posts: 124
    • Bike: Crossrunner
    • City / Town: NEWCASTLE UPON T
    • Country: United kingdom
    Plastic panel pins
    on: January 11, 2018, 12:38:51 pm
    January 11, 2018, 12:38:51 pm
    Hi , l have broken 2 panel pins when fitting radiator GUARD they are the 2 panels on either side , anybody know what size they are ? Think they must be 6 or 7 mm ?

    Thanks BOB

  • Offline Haddo

    • Crossrunner Pro  ‐    138
    • ***
      #1

    Offline Haddo

    • Crossrunner Pro
    • ***
    • Posts: 138
    • Bike: 15CX
    • Country: Aus.
    Re: Plastic panel pins
    Reply #1 on: January 13, 2018, 10:10:35 am
    January 13, 2018, 10:10:35 am
    Take a good one to a panel beater or car parts supplier. The will should have a veriety of clips. Prob. not the oem but will do the job no worries. Get a couple more for spares.

  • Offline Haddo

    • Crossrunner Pro  ‐    138
    • ***
      #2

    Offline Haddo

    • Crossrunner Pro
    • ***
    • Posts: 138
    • Bike: 15CX
    • Country: Aus.
    Re: Plastic panel pins
    Reply #2 on: January 13, 2018, 10:42:13 am
    January 13, 2018, 10:42:13 am
    BTW the only gripe I have with these bikes is the 500 bits of plastic & over the top wiring. Other than that awsome long haul touring bike. If Honda trimmed the crap down a bit they could nail the market.

  • Offline charlie

    • Crossrunner Pro  ‐    124
    • ***
    • Topic Author
    • #3

    Offline charlie

    • Crossrunner Pro
    • ***
    • Topic Author
    • Posts: 124
    • Bike: Crossrunner
    • City / Town: NEWCASTLE UPON T
    • Country: United kingdom
    Re: Plastic panel pins
    Reply #3 on: January 13, 2018, 11:04:33 am
    January 13, 2018, 11:04:33 am
    Thanks l have ordered some from Flea-bay. Will see what they are like .

    Cheers Bob

  • Offline c_stenild

    • Crossrunner Junior  ‐    13
    • *
      #4

    Offline c_stenild

    • Crossrunner Junior
    • *
    • Posts: 13
    • Bike: VFR800x 2014
    • City / Town: Copenhagen
    • Country: Denmark
    Re: Plastic panel pins
    Reply #4 on: January 13, 2018, 12:08:35 pm
    January 13, 2018, 12:08:35 pm
    I think the plastic fastners (also called Plastic Screw Rivets Clip) for the fairing is very fragile. I broke 6 of them when i tried to remount the fairing. In Denmark these fastners costs 2,5 pound -each!. Instead i found them om Ali Express (Chinese) for app. 0.3 pound each! They look and works fine. Only downside is three weeks delivery time. Search for the part number: 90683-gaz-003.

    https://www.aliexpress.com/item/For-Honda-Motorcycle-90683-gaz-003-Motorcycle-Nc-700k-Princess-Joy-100-Jiaying-125-Scooter-Plastic/32714708792.html

  • Offline Skids   gb

    • Crossrunner Master  ‐    1665
    • ****
      #5

    Offline Skids

    • Crossrunner Master
    • ****
    • Posts: 1665
    • Bike: 2018 800X
    • City / Town: Hitchin
    • Country: gb
    Re: Plastic panel pins
    Reply #5 on: January 14, 2018, 07:20:42 am
    January 14, 2018, 07:20:42 am
    *Originally Posted by c_stenild [+]
    I think the plastic fastners (also called Plastic Screw Rivets Clip) for the fairing is very fragile. I broke 6 of them when i tried to remount the fairing. In Denmark these fastners costs 2,5 pound -each!. Instead i found them om Ali Express (Chinese) for app. 0.3 pound each! They look and works fine. Only downside is three weeks delivery time. Search for the part number: 90683-gaz-003.

    https://www.aliexpress.com/item/For-Honda-Motorcycle-90683-gaz-003-Motorcycle-Nc-700k-Princess-Joy-100-Jiaying-125-Scooter-Plastic/32714708792.html

    They're the panel pins for the Fi and Vtec models, not the Crossrunner. The Crossrunner ones are a centred pushpin type.

    They may fit though it would be worth checking the size is correct for Cr.
    98 VFR800 - 130,000 miles, 08 VFR800 - 76,000 miles, 15 VFR800X - 44,000 miles (all sold)
    14 VFR1200 - 20,000 miles
    18 VFR800X - 16,000 miles
    01 VFR800 Fi-1 - 9000 miles

  • Offline c_stenild

    • Crossrunner Junior  ‐    13
    • *
      #6

    Offline c_stenild

    • Crossrunner Junior
    • *
    • Posts: 13
    • Bike: VFR800x 2014
    • City / Town: Copenhagen
    • Country: Denmark
    Re: Plastic panel pins
    Reply #6 on: January 14, 2018, 12:39:09 pm
    January 14, 2018, 12:39:09 pm
    I am a little puzzled, because I have used them and they are a perfect replacement. I have a VFR800x Crossrunner 2014 (old model). I have attached a photo. The original is the one below. Notice the is a little plastic excess on the non original, which the purist (:-) ) can cut off with a Stanley knife.

  • Offline charlie

    • Crossrunner Pro  ‐    124
    • ***
    • Topic Author
    • #7

    Offline charlie

    • Crossrunner Pro
    • ***
    • Topic Author
    • Posts: 124
    • Bike: Crossrunner
    • City / Town: NEWCASTLE UPON T
    • Country: United kingdom
    Re: Plastic panel pins
    Reply #7 on: January 14, 2018, 02:31:10 pm
    January 14, 2018, 02:31:10 pm
    I think the 2016 Crossrunner are different  !

    BOB

  • Offline stubax

    • Crossrunner Pro  ‐    237
    • ***
      #8

    Offline stubax

    • Crossrunner Pro
    • ***
    • Posts: 237
    • Bike: VRF800X
    • City / Town: Manchester
    • Country: UK
    Re: Plastic panel pins
    Reply #8 on: January 14, 2018, 04:20:49 pm
    January 14, 2018, 04:20:49 pm
    The 2015 Crossrunner pins have a central pin that must be pulled out prior to trying to get the pin body out, the central pin locks the main pin body in place. If you didnt remove the central pin first that would explain why the pin bodies broke. Should be obvious when you receive the new pins.  :006:

  • Offline charlie

    • Crossrunner Pro  ‐    124
    • ***
    • Topic Author
    • #9

    Offline charlie

    • Crossrunner Pro
    • ***
    • Topic Author
    • Posts: 124
    • Bike: Crossrunner
    • City / Town: NEWCASTLE UPON T
    • Country: United kingdom
    Re: Plastic panel pins
    Reply #9 on: January 14, 2018, 05:02:41 pm
    January 14, 2018, 05:02:41 pm
    Yes l did realise that , but they are a bit fragile 😩

    Thanks Bob

     


    * Recent Topics

    topic newbie
    [New Members]
    Skids
    Yesterday at 06:19:37 pm
    topic Travel air compressor
    [Accessories and Products]
    brucey
    October 03, 2022, 10:48:15 am
    topic Powerbronze Wind Deflectors
    [Accessories and Products]
    brucey
    October 03, 2022, 10:10:19 am
    topic Heated grips power
    [Accessories and Products]
    Skids
    October 01, 2022, 01:02:55 pm
    topic Hello from Shropshire
    [New Members]
    voodoo
    September 29, 2022, 07:13:45 pm

    recent