Author Chain guard 2013 model.  (Read 2832 times)

0 Members and 1 Guest are viewing this topic.

  • Offline MBabe

    • Crossrunner Junior  ‐    7
    • *
    • Topic Author

    Offline MBabe

    • Crossrunner Junior
    • *
    • Topic Author
    • Posts: 7
    • Bike: VFR800X
    • City / Town: Oswestry
    • Country: England
    Chain guard 2013 model.
    on: August 22, 2018, 07:32:31 pm
    August 22, 2018, 07:32:31 pm
    Hi guys. New owner of a 2013 Crossrunner.

    Checking around all the little nooks and crannies, I found a bracket on the inside of the chain guard and a corresponding hole in the swing arm but no fastening between the two. Can someone do me favour and have a quick look, if you have the same model, and tell me what is supposed to be there.

    There is no screw thread on the swing arm so I’m a bit confused as to how they’re supposed to fix together and I don’t know anyone with the same bike to check theirs .

    Thanks.

  • Offline Skids   gb

    • Crossrunner Master  ‐    1663
    • ****
      #1

    Offline Skids

    • Crossrunner Master
    • ****
    • Posts: 1663
    • Bike: 2018 800X
    • City / Town: Hitchin
    • Country: gb
    Re: Chain guard 2013 model.
    Reply #1 on: August 23, 2018, 12:41:55 pm
    August 23, 2018, 12:41:55 pm
    Could you post a photo to help?
    98 VFR800 - 130,000 miles, 08 VFR800 - 76,000 miles, 15 VFR800X - 44,000 miles (all sold)
    14 VFR1200 - 20,000 miles
    18 VFR800X - 16,000 miles
    01 VFR800 Fi-1 - 9000 miles

  • Offline MBabe

    • Crossrunner Junior  ‐    7
    • *
    • Topic Author
    • #2

    Offline MBabe

    • Crossrunner Junior
    • *
    • Topic Author
    • Posts: 7
    • Bike: VFR800X
    • City / Town: Oswestry
    • Country: England
    Re: Chain guard 2013 model.
    Reply #2 on: August 23, 2018, 03:43:42 pm
    August 23, 2018, 03:43:42 pm
    *Originally Posted by Skids [+]
    Could you post a photo to help?
    thank you. It has an interior car trim button in at the moment but that’s not going to last long.
    Last Edit: August 23, 2018, 03:45:27 pm by MBabe

  • Offline Skids   gb

    • Crossrunner Master  ‐    1663
    • ****
      #3

    Offline Skids

    • Crossrunner Master
    • ****
    • Posts: 1663
    • Bike: 2018 800X
    • City / Town: Hitchin
    • Country: gb
    Re: Chain guard 2013 model.
    Reply #3 on: August 23, 2018, 06:11:01 pm
    August 23, 2018, 06:11:01 pm
    It looks like it should be one of those Honda push-pin connectors that should hold the chain guard to the swing arm. There are many different versions, they don't require a thread and can be obtained from your local Honda dealer (at a great price) or off ebay.
    98 VFR800 - 130,000 miles, 08 VFR800 - 76,000 miles, 15 VFR800X - 44,000 miles (all sold)
    14 VFR1200 - 20,000 miles
    18 VFR800X - 16,000 miles
    01 VFR800 Fi-1 - 9000 miles

  • Offline MBabe

    • Crossrunner Junior  ‐    7
    • *
    • Topic Author
    • #4

    Offline MBabe

    • Crossrunner Junior
    • *
    • Topic Author
    • Posts: 7
    • Bike: VFR800X
    • City / Town: Oswestry
    • Country: England
    Re: Chain guard 2013 model.
    Reply #4 on: August 23, 2018, 06:45:40 pm
    August 23, 2018, 06:45:40 pm
    That’s great thank you for your time. :031:

  • Offline karol

    • Crossrunner Junior  ‐    2
    • *
      #5

    Offline karol

    • Crossrunner Junior
    • *
    • Posts: 2
    • Bike: Crossrunner X
    • City / Town: Grojec
    • Country: Polska
    Re: Chain guard 2013 model.
    Reply #5 on: August 06, 2019, 03:39:35 pm
    August 06, 2019, 03:39:35 pm
    anyone can help me how to pop out this honda push-pin connectors? need to remove chain guard
    thanks for help

  • Offline stubax

    • Crossrunner Pro  ‐    237
    • ***
      #6

    Offline stubax

    • Crossrunner Pro
    • ***
    • Posts: 237
    • Bike: VRF800X
    • City / Town: Manchester
    • Country: UK
    Re: Chain guard 2013 model.
    Reply #6 on: August 06, 2019, 05:34:06 pm
    August 06, 2019, 05:34:06 pm
    Push in the centre pin, but do not push through, and the whole pin should lift out.