Author [NL] [FR] [ES] [DE] [SE] [IT] [NO] [MY] Topic: Exhaust  (Read 2387 times)

0 Members and 1 Guest are viewing this topic.

Offline Beetlejuice

  • Crossrunner Pro
  • ***
  • Posts: 117
  • Bike: 2011 CR800X
  • City / Town: Northumberland
  • Country: UK
Exhaust
on: November 28, 2018, 01:35:45 PM
Hi everyone,

has anyone changed their exhaust from either the stock can or the Akra can for something that opens up the rear wheel?

I'd like to change to something similar to the Yamaha Tracer/MT09 but I can't find anything anywhere.

Any ideas?

Cheers

Offline reasty

  • Crossrunner Master
  • ****
  • Posts: 575
  • Bike: CR-750fj-Fat boy
  • City / Town: Croydon
  • Country: uk
Re: Exhaust
Reply #1 on: November 28, 2018, 09:02:18 PM
Have a look at Beowulf

Offline Beetlejuice

  • Crossrunner Pro
  • ***
  • Posts: 117
  • Bike: 2011 CR800X
  • City / Town: Northumberland
  • Country: UK
Re: Exhaust
Reply #2 on: December 03, 2018, 12:09:15 PM
Nothing on their site.
The only one I can find is a Coffman shorty end can - https://www.coffmansexhaust.com/

Offline Haddo

  • Crossrunner Member
  • **
  • Posts: 90
  • Bike: 15CX
  • Country: Aus.
Re: Exhaust
Reply #3 on: December 03, 2018, 05:59:53 PM
Arrow

Offline Haddo

  • Crossrunner Member
  • **
  • Posts: 90
  • Bike: 15CX
  • Country: Aus.
Re: Exhaust
Reply #4 on: December 03, 2018, 06:18:31 PM
BTW. Arrow is a slip on. 2/3 the cost of Akro. No remap required baffle in or out on 15- VFR800x.
If you havn't heard of them they have been making race pipes for race road & off for decades. I've had them on a few bikes over the years including a pre-bmw Husky WR250 & GG ec300 I raced enduro. They are real deal designed pipes not just pretty looking gimmicks for show.

Online Skids

  • Crossrunner Master
  • ****
  • Posts: 1328
  • Bike: 2018 800X
  • City / Town: Hitchin
  • Country: UK
Re: Exhaust
Reply #5 on: December 03, 2018, 06:27:11 PM
Have you considered DAM? Whilst they're not true shortie cans, they are beautifully made and short enough to show off the back end very well. I have one on my 1200, picture below and they sound gorgeous!
98 VFR800 - 130,000 miles (sold)
08 VFR800 - 76,000 miles (sold)
14 VFR1200 - 20,000 miles
15 VFR800X - 44,000 miles (sold)
18 VFR800X - 9,000 miles

Offline Haddo

  • Crossrunner Member
  • **
  • Posts: 90
  • Bike: 15CX
  • Country: Aus.
Re: Exhaust
Reply #6 on: December 03, 2018, 06:40:03 PM
It's not a shorty but not big either.

Offline Si Click

  • Crossrunner Master
  • ****
  • Posts: 302
  • Bike: Honda VFR 800 X
  • Country: UK
Re: Exhaust
Reply #7 on: December 03, 2018, 09:15:31 PM
Have a look at the Ixil Hyperflow.
http://ixil.com/en/vfr-800-f-14-16/1071-honda-vfr-800-f-14.html

I have a stainless one on my 2011 and people often comment on how good it looks.

Not my bike BTW, I just didn't have a photo of mine to hand.
Best Regards Dave
2012 Honda Crossrunner
1955 Triumph TR2
1999 Land Rover Discovery 2 TD5 ES

Offline Beetlejuice

  • Crossrunner Pro
  • ***
  • Posts: 117
  • Bike: 2011 CR800X
  • City / Town: Northumberland
  • Country: UK
Re: Exhaust
Reply #8 on: December 04, 2018, 12:12:58 PM
all nice exhausts but nothing that opens up the rear end.

I'm not even sure it's possible but this is what i'm looking for to have the rear end on display:


Offline Beetlejuice

  • Crossrunner Pro
  • ***
  • Posts: 117
  • Bike: 2011 CR800X
  • City / Town: Northumberland
  • Country: UK
Re: Exhaust
Reply #9 on: December 04, 2018, 12:15:37 PM
Or this on an 800F: