Side stand mounting 2016 Crossrunner

[Red Leader]

Mark 2 Crossrunner, I wonder if some kind person could take a picture of their side stand mount with the side stand in the up position.

I had my bike lowered and to get the bike to the correct lean angle part of the mount (the bit that makes contact with the side stand in the down position) was filed down. I have put the bike back to the original height and want to restore the mount back to original as it is now leaning too far.

I could make a guess but better to see how Mr Honda made it.

Thanks in advance..

[Skids]

Not sure how useful this will be as my sidestand is not OEM.

[Red Leader]

Thanks for your quick reply, 👍
a bit difficult to see as the bit in question is actually where the side stand hits the mount when in the down position, but to actually see it the stand has to be in the up position if you know what I mean.
Looking at the pic it actually looks as if your mount may have been modified too? There should be a protrusion on the mount that hits the stand, this gets filed down when the bike is lowered to allow the stand to go further forward, but I'm trying to find out what this protrusion looks like.

[Skids]

I figured out wouldn't be useful but perhaps you could upload a photo of what you want a photo taking of? It might help.

[Red Leader]

I believe there should be a protrusion (perhaps similar to what I have drawn which butts up to the stand when down, but would like to know what the actual looks like.
Cheers

[ramski]

Just checked mine, same as yours no lug

[Red Leader]

Thanks for looking! I'll have to take a guess as to what it should be.

[Gramps99]

There is a youtube video, search fitting crossrunner lowering kit. On the video quite a bit of metal is removed from the part which the side stand  rests against.
IMHO it seems better to have the side stand itself shortened. Mind you thats how I became the proud owner of a standard and shortened side stand.

[Red Leader]

Yes, think that was the video I was looking for to see what was done, but so far I haven't found it.

I've welded it up again to what I think it should be. Bike still leans a bit, but is stable and should be ok..
Fingers crossed! 

[ramski]

RL

I think you are looking for something that dosn't exist,

just for the hell of it I just removed my sidestand switch, and the bracket is exactly the same as yours,

still with the original paint on it,

the stand fits perfectly parallel,mated tight and snug against the bracket when down,

in my opinion it would not be as stable/secure with a lug on the bracket,

thats my penny's worth

good luck with the hunt