Powdercoating

[Lampie]

My Crossrunner 2015 in Black
Anyone done a colorchange of the wheels ??

I'd like to give them an other color, like gunmetal gray...Or 2 colors,  the spokes in a different silver color, and wheel in satin black...

Something like that...  Pictures ???

[Haddo]

Powder coating will need acid bath & coating. Most duel culours would be powder coating one culour then masking & painting the second for aesthetics. Maybe powdercoat rims then prep, mask & paint outer edges of spokes? Powder coating alone duel culours will require ALOT of effort & cost for a one off application.

[Lampie]

 

Now I'm happy

3 months ago..Februari 2021. leaking seals, rusty disks, almost worn brakepads, and damaged paint on the rims. 



Now back from the powdercoater,  + new disks + new SKF bearings (shaftseals and tire  needs to be placed, I know)
I even replaced the 10 bolts for the brakedisks, (one snapped off )





 

[voodoo]

En wat is de kilometerstand nu?

[Skids]

Originally Posted by Lampie

Now I'm happy

3 months ago..Februari 2021. leaking seals, rusty disks, almost worn brakepads, and damaged paint on the rims. 

 

[Lampie]

[voodoo]

Originally Posted by voodoo

En wat is de kilometerstand nu?

Duh, dat staat onderaan je post....

Ik ben op 68.000, maar die van mij heeft duidelijk een minder zwaar leven.

[Goggins]

What a transformation Lampie. How much roughly did the wheel refurb cost, if you don’t mind me asking. Quite fancy the repsol orange colour on my white xrunner. The akro exhaust for sale on here would be a great addition too

[Lampie]

Brakedisks Honda original : € 440
Brakepads Brembo € 45
10 new bolts (for disks)  € 23 
5 stainless bolts ABSring € 2,50
bearings SKF and shaftseals € 25       using 28x47x7 as seal, little modifying,  original = 28x47,2 x 7   and € 18 per seal
powdercoating € 185  2 wheels.
tire handling  € 40  including balance.

Adds up... doesn't it   

[Goggins]

Originally Posted by Lampie

Brakedisks Honda original : € 440
Brakepads Brembo € 45
10 new bolts (for disks)  € 23 
5 stainless bolts ABSring € 2,50
bearings SKF and shaftseals € 25       using 28x47x7 as seal, little modifying,  original = 28x47,2 x 7   and € 18 per seal
powdercoating € 185  2 wheels.
tire handling  € 40  including balance.

Adds up... doesn't it   

Thanks for that. Gives me a rough idea what to expect to pay if I go down that route. Nothing cheap nowadays, whether it be bike or car related that’s for sure. I think the thing is if you’re happy with the end result, cost doesn’t matter.