12v POWER SUPPLY

[GeoffTheChef]

My 12v POWER SUPPLY SOCKET has stopped working. I have 2019 model. I use the power supply for my tyre inflator/ guage.
I suspect a fuse ? Can't find reference to fix in manual. Any ideas or help appreciated.

[voodoo]

Afaik Honda didn't do a 12V socket as original option, so therefor no mentioning in the manual.

I say: "follow the wires!" (Not the money) 

[ramski]

That socket is only rated at 3 amp max, seems low rating for a tyre inflator?

I have a slime tyre inflator its rated for use in sockets 15 amp plus,

but sorry I have no idea where the fuse is or if its an individual fuse,is the accessory harness fused are the heated grips working?

have you checked the fuses under the seat? have you tried something else in the socket?

have you used the tyre inflator before, is its plug fused?

just my thoughts Geoff, good luck

[Skids]

Originally Posted by voodoo

Afaik Honda didn't do a 12V socket as original option, so therefor no mentioning in the manual.

I say: "follow the wires!" (Not the money) 

Standard on 18+ models. 

[GeoffTheChef]

Originally Posted by ramski

That socket is only rated at 3 amp max, seems low rating for a tyre inflator?

I have a slime tyre inflator its rated for use in sockets 15 amp plus,

but sorry I have no idea where the fuse is or if its an individual fuse,is the accessory harness fused are the heated grips working?

have you checked the fuses under the seat? have you tried something else in the socket?

have you used the tyre inflator before, is its plug fused?

Cheers Ramski and Skids,
I thought tyre inflator would be okay and that thee socket was standard 12v, my mistake.
Under the seat I only see two fuses, 20 and 30 amp.
It has worked several times, but plugged in inflator the other day and nothing.
Might give dealer a call and see if they know.

Thanks again.

just my thoughts Geoff, good luck

[ramski]

Geoff

I've just removed my seat to access the fuses, the fuse box on the left with 10 amp mini fuses
(left has you sit on bike)

the 1st one (working from the middle of the bike) is marked acc on the cover, I pulled this and it cut the power to the lighter socket, replaced power restored, so thats the feed,
also check your inflator plug that may have a fuse in it

[ramski]

This will explain it better than me

[GeoffTheChef]

RAMSKI, your'e a genius...    hahaha
I followed your photo and idea and yes it was a 10amp ACC fuse. Replaced with the supplied spare and just checked my tyre pressures with inflator. All working again fine.

Much appreciated. 

[ramski]

Great

now whats the amp rating of the inflator?

[GeoffTheChef]

It says !2v, Current 10amp.
Is this why the fuse is blown ?
Should I use the socket for this ?