2019 CR front sprocket

[Corringdon]

I am having great difficulty in finding a supplier for the front sprocket on my 2019 CR. The OEM sprocket is the JT1332RB and JT Sprockets list the item but do not seem to stock it nor, does it seem, anybody else. Would any forum members know where I could obtain one? Many thanks. Jim.

[Micku]

Good evening Jim

I've purchased my last few sprocket sets from wemoto.com they seem to have some in stock.

Regards

Mick

[Corringdon]

Many thanks, Mick. I'll check it out.

[Corringdon]

Originally Posted by Micku

Good evening Jim

I've purchased my last few sprocket sets from wemoto.com they seem to have some in stock.

Regards

Mick

I've checked the Wemoto site, Mick, and they only supply the plain steel sprocket and not the rubber cushioned item that is fitted by Honda. Many thanks for the suggestion though.

[Goggins]

Hi Corringdon, I think I got mine from perfomoto on the bay. It took a couple of weeks to order and was add on to a complete kit with gold did chain, afam rear sprocket and riveting tool. I’ve looked through all my history and can’t for the life of me find the order. What I will say is make sure it is for the 525 chain and 16 tooth as I almost received a 530 one instead. Failing that, you could try the jtf1370-16rb and let us know how you get on. Seems a lot easier to get IF it fits

[Corringdon]

Thanks for the suggestions, Goggins. I'll let you know how I get on.

[Corringdon]

Hello again, Goggins. The JT1370RB sprocket is almost 2mm wider than the 1332 so will not fit. Perfomoto do not supply individual sprockets. Again many thanks for your suggestions.

[Beetlejuice]

Have you tried here https://www.bike-parts-honda.com/honda-motorcycle/800-MOTO/CROSSRUNNER/2019/VFR800XH/Engine/GEARBOX/97940/E_17/1/37236

if the link works correctly, looks like it's part no.18 - not sure if it's in stock though

[Goggins]

Originally Posted by Corringdon

Hello again, Goggins. The JT1370RB sprocket is almost 2mm wider than the 1332 so will not fit. Perfomoto do not supply individual sprockets. Again many thanks for your suggestions.

Thanks for confirming that. I’ve found the kit box in my garage with the afam front sprocket still in it. It is just the steel one with no rubber on the side of it. I definitely changed the front one and on closer inspection, it was for an ognibene 16 tooth one and not a jt. Sorry can’t be any more help than that.
I also use the same part finder as the one Beetlejuice has linked to.
Regards

[Corringdon]

Originally Posted by Beetlejuice

Have you tried here https://www.bike-parts-honda.com/honda-motorcycle/800-MOTO/CROSSRUNNER/2019/VFR800XH/Engine/GEARBOX/97940/E_17/1/37236

if the link works correctly, looks like it's part no.18 - not sure if it's in stock though

Thanks for the link, Beetlejuice. The Honda item is eye wateringly expensive.
Do you have the part number for the Ognibene sprocket, Goggins?