Rear brake calliper and sliding pin bolt torque

[McGrou]

Good afternoon, can anyone assist me on what are the torque settings for the two rear brake calliper mounting bolts. And the slider pin that holds the pads in place. I have a 2019 CR

Thanks in advance McGrou

[Lars]

Hello !

the REAR mounting bolts are 33 Nm, the REAR pad pins are 18 Nm.

and just for future reference

the FRONT mounting bolts are 45 Nm, the FRONT pad pins are 15Nm

oh and source:
https://www.vfrdiscussion.com/index.php?/files/file/260-2014-2015-vfr800f-rc79-8th-gen-service-manual

the manual is not specific for the the 2019 model ( RC94 ) but the values are valid and its the same for the 2015 ( RC 80 ) model as well.


Lars

[Skids]

Originally Posted by McGrou

Good afternoon, can anyone assist me on what are the torque settings for the two rear brake calliper mounting bolts. And the slider pin that holds the pads in place. I have a 2019 CR

Thanks in advance McGrou

Hi, from the VFR800F section of the Service Manual (not in the 800X section so must be the same as F model).



HTH

[McGrou]

Thank you both for the replies I really appreciate your assistance 👍🏻
Regards McGrou

[McGrou]

Skids,
What’s the manual you have got? I’ve been looking for a hayes manual but it looks like they don’t do one. The small booklet I got with my CR hasn’t got a lot of the info inside to assist the home mechanic

[Skids]

Originally Posted by McGrou

Skids,
What’s the manual you have got? I’ve been looking for a hayes manual but it looks like they don’t do one. The small booklet I got with my CR hasn’t got a lot of the info inside to assist the home mechanic

Hi McGrou

It's a factory service manual. There isn't a specific one for the Crossie so this is a VFR800F SM with an 800X separate section of differences.

There is a downloadable SM for the 800F available of VFRD which is a good start. I got both from another member so I don't know their origin.

[McGrou]

  that’s great much appreciated

[BJ]

You will be able to find the combined VFR800F (2014+) and VFR800X (2015+) shop manual here:

https://www.vfrdiscussion.com/index.php?/forums/topic/101211-honda-vfr800f-vfr800x-shop-manual/.