26 May 22, 08:28 AM

Author Topic: Garmin Sat nav power supply  (Read 251 times)

0 Members and 1 Guest are viewing this topic.

Offline hi8prt

  • Crossrunner Junior
  • *
  • Posts: 8
  • Bike: VFR 800XCDC
  • City / Town: Scunthorpe
  • Country: United Kingdom
Garmin Sat nav power supply
on: April 21, 2022, 08:07:53 PM
HI guy's have a question to run by you. I have put a Garmin sat nav  mount on the bike and ran the wires  through to under the seat and to check all is good connected direct to the battery and all is good I have now removed it from the battery as I don't want a permanent live before I cut into a wire I wanted to run it by you to see if it would be okay to cut into the positive cable going to the rear light under the pillion seat. I wasn't sure if this would be ok as it is to a LED light and was concerned if this would be a problem to the bikes system. Any help would great TIA cheers Phil. PS or is there any other supply wire I could take it off ??