HI guy's have a question to run by you. I have put a Garmin sat nav mount on the bike and ran the wires through to under the seat and to check all is good connected direct to the battery and all is good I have now removed it from the battery as I don't want a permanent live before I cut into a wire I wanted to run it by you to see if it would be okay to cut into the positive cable going to the rear light under the pillion seat. I wasn't sure if this would be ok as it is to a LED light and was concerned if this would be a problem to the bikes system. Any help would great TIA cheers Phil. PS or is there any other supply wire I could take it off ??
