Author Akrapovic OEM no baffle  (Read 1505 times)

0 Members and 1 Guest are viewing this topic.

  • Offline Mossy

    • Crossrunner Member  ‐    26
    • **
    • Topic Author

    Offline Mossy

    • Crossrunner Member
    • **
    • Topic Author
    • Posts: 26
    • Bike: Crossrunner 800
    • City / Town: Horsham
    • Country: UK
    Akrapovic OEM no baffle
    on: April 29, 2022, 06:49:17 pm
    April 29, 2022, 06:49:17 pm



    £450 but open to offers
    Selling this, pretty much not used exhaust, been on my 2020 crossie since late 2021 but I wanted something that allowed access to the rear wheel and displayed the single sided swing arm off well.
    Against what others are saying, I think the sound is top notch, just wish it wasn't as long.
    https://www.ebay.co.uk/itm/294956877945?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=KhvZbk01RA6&sssrc=2349624&ssuid=KhvZbk01RA6&var=&widget_ver=artemis&media=COPY

  • Offline Goggins   scotland

    • Crossrunner Pro  ‐    139
    • ***
      #1

    Offline Goggins

    • Crossrunner Pro
    • ***
    • Posts: 139
    • Bike: Crossrunner 800x
    • City / Town: Peterhead
    • Country: scotland
    Re: Akrapovic OEM no baffle
    Reply #1 on: April 29, 2022, 07:22:48 pm
    April 29, 2022, 07:22:48 pm
    Hi Mossy, out of curiosity, what have you stuck on your bike instead? Had this debate before regarding the exhaust blocking the view.
    Regards

  • Offline Mossy

    • Crossrunner Member  ‐    26
    • **
    • Topic Author
    • #2

    Offline Mossy

    • Crossrunner Member
    • **
    • Topic Author
    • Posts: 26
    • Bike: Crossrunner 800
    • City / Town: Horsham
    • Country: UK
    Re: Akrapovic OEM no baffle
    Reply #2 on: April 29, 2022, 07:44:46 pm
    April 29, 2022, 07:44:46 pm
    *Originally Posted by Goggins [+]
    Hi Mossy, out of curiosity, what have you stuck on your bike instead? Had this debate before regarding the exhaust blocking the view.
    Regards

    I put a ixil duel hyperlow on it, it's a bit too loud for my liking without the baffles, but sounds deep and aggressive but tinny with the baffles in unfortunately, but it looks really good.
    One thing I will say, I waited for shipping from them for 2 weeks and it came with sand in it from Spain...
     :027:

  • Offline mhjc21

    • Crossrunner Member  ‐    21
    • **
      #3

    Offline mhjc21

    • Crossrunner Member
    • **
    • Posts: 21
    • Bike: 2016 crossrunner
    • City / Town: Didcot
    • Country: UK
    Re: Akrapovic OEM no baffle
    Reply #3 on: May 01, 2022, 10:22:11 am
    May 01, 2022, 10:22:11 am
    Just for everyones info, I fitted an Arrow end can, the conical one with the carbon end cap. looks absolutely brilliant and sounds good.Not to loud but havent tried it with the baffle out yet. Bit expensive but beautifly made and well worth the money.
    Got it from B & C express.

  • Offline mhjc21

    • Crossrunner Member  ‐    21
    • **
      #4

    Offline mhjc21

    • Crossrunner Member
    • **
    • Posts: 21
    • Bike: 2016 crossrunner
    • City / Town: Didcot
    • Country: UK
    Re: Akrapovic OEM no baffle
    Reply #4 on: May 01, 2022, 10:23:18 am
    May 01, 2022, 10:23:18 am
    Re the above, it's called the Arrow X-kone carbon end cap.
    Shows off the back wheel a treat

  • Online Skids   gb

    • Crossrunner Master  ‐    1661
    • ****
      #5

    Online Skids

    • Crossrunner Master
    • ****
    • Posts: 1661
    • Bike: 2018 800X
    • City / Town: Hitchin
    • Country: gb
    Re: Akrapovic OEM no baffle
    Reply #5 on: May 01, 2022, 12:43:23 pm
    May 01, 2022, 12:43:23 pm
    Any chance of a photo with it fitted?
    98 VFR800 - 130,000 miles, 08 VFR800 - 76,000 miles, 15 VFR800X - 44,000 miles (all sold)
    14 VFR1200 - 20,000 miles
    18 VFR800X - 16,000 miles
    01 VFR800 Fi-1 - 0 miles (yet)

  • Offline mhjc21

    • Crossrunner Member  ‐    21
    • **
      #6

    Offline mhjc21

    • Crossrunner Member
    • **
    • Posts: 21
    • Bike: 2016 crossrunner
    • City / Town: Didcot
    • Country: UK
    Re: Akrapovic OEM no baffle
    Reply #6 on: May 01, 2022, 01:02:55 pm
    May 01, 2022, 01:02:55 pm
    I'll certainly give it a try Skids but I'm not to technical with this posting photo's lark. I might have to get my fellow CR owner to give me a hand but be patient, it may take a few days.
    It does look the dogs dangley bits though. Best looking can I have seen on a CR yet.

  • Offline Mossy

    • Crossrunner Member  ‐    26
    • **
    • Topic Author
    • #7

    Offline Mossy

    • Crossrunner Member
    • **
    • Topic Author
    • Posts: 26
    • Bike: Crossrunner 800
    • City / Town: Horsham
    • Country: UK
    Re: Akrapovic OEM no baffle
    Reply #7 on: May 05, 2022, 08:27:03 pm
    May 05, 2022, 08:27:03 pm
    *Originally Posted by Skids [+]
    Any chance of a photo with it fitted?

    Had to search through photos, seem I don't take pictures of it very often from that side


  • Offline Goggins   scotland

    • Crossrunner Pro  ‐    139
    • ***
      #8

    Offline Goggins

    • Crossrunner Pro
    • ***
    • Posts: 139
    • Bike: Crossrunner 800x
    • City / Town: Peterhead
    • Country: scotland
    Re: Akrapovic OEM no baffle
    Reply #8 on: May 06, 2022, 09:01:10 am
    May 06, 2022, 09:01:10 am
    *Originally Posted by Skids [+]
    Any chance of a photo with it fitted?

     :047:  it is Mossy’s topic right enough. Hands up who else wasn’t expecting that photo.
    I’ll start  :046:

  • Offline mhjc21

    • Crossrunner Member  ‐    21
    • **
      #9

    Offline mhjc21

    • Crossrunner Member
    • **
    • Posts: 21
    • Bike: 2016 crossrunner
    • City / Town: Didcot
    • Country: UK
    Re: Akrapovic OEM no baffle
    Reply #9 on: May 12, 2022, 04:13:46 pm
    May 12, 2022, 04:13:46 pm
    <img src="https://images.honda-crossrunner.com/IMG_1934.md.jpg" alt="IMG_1934.jpg"/>

    Hi everyone, this is hopefully a photo of the Arrow can that I fitted, can also be seen in the Gallery