Setting clock help

[Newbs1ok]

Hi Folks

Need some help please

Trying to change time whilst in France

Resetting as per instruction manual when I press Set on flashing minutes it Zeros and doesn’t save change

It is frustrating

Is this a problem of I’d it operator error

My travelling compatriots why are more techno Savy than me are getting the same result as my

Your help appreciated

TIA

[Goggins]

Hi, not sure if it’s the owners manual for the crossrunner or a vfr 800f but here are a couple of photos from my owners manual.




Good luck.

[Newbs1ok]

Cheers Goggins
That’s the same as the VFR X handbook
And that’s what we have done
😱

[voodoo]

As a workaround, adjust the time at midnight.......

[Skids]

Once set, turn ignition off.

[GeoffTheChef]

I had same issue and worked it out... set as instructuctions in user manual. When correct time is showing, SWITCH OFF IGNITION, THEN BACK ON and correct time should be set.

[Goon]

You may find once the clock is set that when you turn the ignition on it resets to midnight. This is not the case its the stopwatch (!!!) function, press the set button a few times until the current time and a little clock icon appears then leave well alone. Already had this nightmare myself.

[Newbs1ok]

Goon
That makes sense
I have tried the other suggestions to no avail
I gave up in the end and just used the Tom Tom clock
On Ferry home as I type so will try your suggestion tomorrow

Thanks a lot and too all you other guys who offered advice

I really appreciate it

Keep safe

[Newbs1ok]

Goon
I have tried that in my darkened garage
I obviously couldn’t see the clock icon on the daylight

I have done as you said but it always goes back to oo.00 and becomes a trip timer
Even tried Skids advive and turned ignition on and off
The handbook advice
Ot always go back to 00.00

Getting frustrated now

Regards Newbs

[Skids]

Originally Posted by Newbs1ok

Goon
I have tried that in my darkened garage
I obviously couldn’t see the clock icon on the daylight

I have done as you said but it always goes back to oo.00 and becomes a trip timer
Even tried Skids advive and turned ignition on and off
The handbook advice
Ot always go back to 00.00

Getting frustrated now

Regards Newbs

Where do you live?