Author Exhaust support for aftermarket pipes  (Read 3022 times)

0 Members and 1 Guest are viewing this topic.

  • Offline Frenkie-1961

    • Crossrunner Member  ‐    21
    • **
    • Topic Author

    Offline Frenkie-1961

    • Crossrunner Member
    • **
    • Topic Author
    • Posts: 21
    Exhaust support for aftermarket pipes
    on: September 26, 2012, 05:11:38 pm
    September 26, 2012, 05:11:38 pm
    You all know the standard stock exhaust is fastened with the frame with a big rugged auminium support. This one also holds the passenger steps. I need an alternative support bracket, without the passenger steps fitting. Anyone of you can guide me in the right direction ?

  • Offline xrunjoe

    • Non Active
    • Crossrunner Master  ‐    605
    • *
      #1

    Offline xrunjoe

    • Non Active
    • Crossrunner Master
    • *
    • Posts: 605
    • Ex crossrunner owner
    • Bike: Ex CR owner
    • City / Town: Northampton
    • Country: UK
    Re: Exhaust support for aftermarket pipes
    Reply #1 on: September 26, 2012, 05:24:26 pm
    September 26, 2012, 05:24:26 pm
    Not seen anything - although have never really looked.

    Presumably you would like to remove both right and left hand rear peg mounts and need a replacement on right hand side to hang exhaust from ? Is this because you find the stock mountings interfer with your feet?

    Friend of mine didn't like the rear brackets because of this -  he rides solo only, sports style with feet on tip toe - resulting in heels against the rear mountings.


  • Offline Frenkie-1961

    • Crossrunner Member  ‐    21
    • **
    • Topic Author
    • #2

    Offline Frenkie-1961

    • Crossrunner Member
    • **
    • Topic Author
    • Posts: 21
    Re: Exhaust support for aftermarket pipes
    Reply #2 on: September 26, 2012, 05:33:18 pm
    September 26, 2012, 05:33:18 pm
    Yeah, I am handy enough to manufacter a bracket myself, but if it is out there thats even easier. My GF has the same support on her Yamaha Fazer; stock support with pegs off, and a nice shiny aluminium bracket instead, just for the exhaust support. Guess its time to google my butt off :)

  • Offline xrunjoe

    • Non Active
    • Crossrunner Master  ‐    605
    • *
      #3

    Offline xrunjoe

    • Non Active
    • Crossrunner Master
    • *
    • Posts: 605
    • Ex crossrunner owner
    • Bike: Ex CR owner
    • City / Town: Northampton
    • Country: UK
    Re: Exhaust support for aftermarket pipes
    Reply #3 on: September 26, 2012, 05:35:44 pm
    September 26, 2012, 05:35:44 pm
    You would need to measure up holes and look for something which would fit...but they do exist....
    http://www.ebay.co.uk/itm/CBR125R-Exhaust-Hanger-2004-2005-2006-2007-2008-2009-2010-/170856487432?pt=UK_Motorcycle_Parts&hash=item27c7d71a08