Author Slippery seat  (Read 3728 times)

0 Members and 1 Guest are viewing this topic.

  • Offline ExceledSteve

    • Crossrunner Junior  ‐    5
    • *
    • Topic Author

    Offline ExceledSteve

    • Crossrunner Junior
    • *
    • Topic Author
    • Posts: 5
    • Bike: Crossrunner
    • City / Town: SunburyOnThames
    • Country: UK
    Slippery seat
    on: February 04, 2014, 04:30:47 pm
    February 04, 2014, 04:30:47 pm
    Yay! Just picked up my crossrunner today... Absolutely love it already. Anyone else feel like their seat has been polished making it slippery (in leathers)? My first junction unexpectedly slid me forwards almost into the tank.

  • Offline DetourPhil

    • Crossrunner Pro  ‐    167
    • ***
      #1

    Offline DetourPhil

    • Crossrunner Pro
    • ***
    • Posts: 167
    • Country: United Kingdom
    Re: Slippery seat
    Reply #1 on: February 05, 2014, 07:52:09 am
    February 05, 2014, 07:52:09 am
    Yep, that's how they are on the first model....
    Fortunately, the previous owner of my bike had the seat recovered with grippy material :)

  • Offline Massimino

    • Crossrunner Junior  ‐    7
    • *
      #2

    Offline Massimino

    • Crossrunner Junior
    • *
    • Posts: 7
    • Bike: Crossrunner
    • City / Town: Rome
    • Country: Italy
    Re: Slippery seat
    Reply #2 on: February 19, 2014, 11:35:39 am
    February 19, 2014, 11:35:39 am
    Same here. Too slippery.
    I read about new model with no slippery seat: maybe we will see on the Italian exhibition

  • Offline Massimino

    • Crossrunner Junior  ‐    7
    • *
      #3

    Offline Massimino

    • Crossrunner Junior
    • *
    • Posts: 7
    • Bike: Crossrunner
    • City / Town: Rome
    • Country: Italy
    Re: Slippery seat
    Reply #3 on: April 29, 2014, 03:41:07 pm
    April 29, 2014, 03:41:07 pm
    Sorry for the delay in writing news on this discussion.
    I confirm: during the Rome exhibition Motodays I saw a news seat model for crossrunner and it looks like a no slippery one.
    But, BUT...Honda Staff explain me that the new seat is very expensive (about 300€ or more)

  • Offline Jimbo675

    • Crossrunner Pro  ‐    118
    • ***
      #4

    Offline Jimbo675

    • Crossrunner Pro
    • ***
    • Posts: 118
    • City / Town: Melbourne
    • Country: Australia
    Re: Slippery seat
    Reply #4 on: April 30, 2014, 03:37:24 am
    April 30, 2014, 03:37:24 am
    Sometimes you can just order the cover.

  • Offline Slidy

    • Crossrunner Pro  ‐    100
    • ***
      #5

    Offline Slidy

    • Crossrunner Pro
    • ***
    • Posts: 100
    • Bike: Crossrunner
    • City / Town: Cleobury
    • Country: England
    Re: Slippery seat
    Reply #5 on: April 30, 2014, 08:47:03 am
    April 30, 2014, 08:47:03 am
    Until you change your seat, or get recovered, Just buy a length of anti slip rubber mat, used for under rugs on wooden floors. . . . It sells for around £1 in England.
    Take off the seat, wrap it round, and put the seat back on. Nice and neat, and no longer slippery!

    I use a small piece for the pillion seat whenever we go out.


  • Offline locomondo1975

    • Crossrunner Junior  ‐    2
    • *
      #6

    Offline locomondo1975

    • Crossrunner Junior
    • *
    • Posts: 2
    • Bike: Crossrunner
    • City / Town: Edessa
    • Country: Greece
    Re: Slippery seat
    Reply #6 on: April 30, 2014, 11:54:39 am
    April 30, 2014, 11:54:39 am
    I used triboseat (I found it on ebay), for passenger ,and riders seat..  :047:

  • Offline Duke

    • Crossrunner Member  ‐    16
    • **
      #7

    Offline Duke

    • Crossrunner Member
    • **
    • Posts: 16
    • Bike: loads & vfr800x
    • City / Town: Dublin
    • Country: Ireland
    Re: Slippery seat
    Reply #7 on: July 17, 2019, 03:35:22 pm
    July 17, 2019, 03:35:22 pm
    just bumping this up,

    ive a gen1 CR, has anyone been using the triboseat covers for both pillion and rider ?

    what are your thoughts ?

     



    recent