SW Motech Handlebar

[jan1195xx]

Changed the handlebar to sw motech conversion with a wider bar:
http://www.cbr-xx.de/000001985c0a4f46e/000001985c0ae5dae/033cb8a30d0f81901/d017.html

and a black windscreen:
http://www.cbr-xx.de/000001985c0a4f46e/000001985c0ae5dae/033cb8a30d0f81901/d018.html

I like much more to ride with the wider handlebar. And i fit a set of V-Trec levers for clutch and brake. Also a braided steel line for the clutch. Next is a gear indicator and a sw motech bracket for my sat nav. I will take some pice, when all things a fitted to the bike.

Jan

[54K+]

Are the handlebars any higher or just wider than the standard fit? More like the 2015 model?

[jan1195xx]

It's a little bit wider and gives me a better position for riding, especially for cornering. And i made my seat 4 cm higher, with this i feel much better on the cr. I am 185 cm high.

Jan

[leathers999]

Looked on SW motech site and can't see these bars, are they specifically for xrunner? Also did you have any problems with cables etc (needing longer one's)?

[54K+]

Its a bar riser not a handlebar, below is the link. 
http://shop.sw-motech.com/cgi-bin/cosmoshop/lshop.cgi?action=showdetail&wkid=143221483310306&ls=en&nc=1432214877-11314&rubnum=brands.honda.vfr800x&artnum=LEH.01.039.10500/B&id=90&gesamt_zeilen=50Tshowrub--brands.honda.vfr800x&typid=176944391

[leathers999]

Cool! I am liking the look of that 

[jan1195xx]

Risers from sw motech incl. a bar from lsl. I did not need new cables, changed only the position of them.

Jan

[leathers999]

Thanks Jan.

[soundhound86]

This is what I want to do to mine! I don't like the plastic covered handlebars on the crossrunner