Author [NL] [FR] [ES] [DE] [SE] [IT] [NO] [MY] Topic: Brakes  (Read 2200 times)

0 Members and 1 Guest are viewing this topic.

Jokie

  • Guest
Brakes
on: November 21, 2014, 09:29:23 PM
Is there a way to properly check if the dcbs still works? Last night I had the rear on a paddock stand and the engine in gear. When pulling the front brake, the rear wheel didn't slow down. Does that mean dcbs doesn't work anymore or am I doing something wrong?

Offline cross

  • Crossrunner Junior
  • *
  • Posts: 11
  • Bike: Crossrunner
  • Country: Portugal
Re: Brakes
Reply #1 on: November 22, 2014, 01:06:22 AM
I believe that on the CR the front breaks are stand alone. Only front wheel.

Only the rear brake actuates on both front and rear wheels

Jokie

  • Guest
Re: Brakes
Reply #2 on: November 22, 2014, 07:15:17 AM
Ok that would make sense then! Thanks for the reply. Did some searching online and you are right. The front lever only operates the front. The rear pedal operates both rear and front.

Offline Firedragon

  • Crossrunner Junior
  • *
  • Posts: 8
  • Bike: CrossRunner
  • City / Town: Singapore
  • Country: Singapore
Re: Brakes
Reply #3 on: November 24, 2014, 02:13:04 AM
Hi Jokie,

Practically, you may want to try out putting your CR in main stand and try to rotate the rear wheel and then apply the front brake. Then you will see your rear wheel still rotating even you apply the front brake.

Our Combine brake system only apply when rear brake was activated.

 :031:Cheers...

 



recent