Author OBD Tool and Ignitech ECU  (Read 3994 times)

0 Members and 1 Guest are viewing this topic.

  • Offline jan1195xx

    • Ex Member
    • Crossrunner Member  ‐    78
    • *
    • Topic Author

    Offline jan1195xx

    • Ex Member
    • Crossrunner Member
    • *
    • Topic Author
    • Posts: 78
    OBD Tool and Ignitech ECU
    on: March 07, 2015, 12:17:45 pm
    March 07, 2015, 12:17:45 pm
    I bought the OBD Tool from healtech for my CR. Nice thing to play. You can see every detail of all sensors and the revs and and and. You can also see the list of fault codes and delete the list. Looks like that:
    http://www.cbr-xx.de/000001985c0a4f46e/000001985c0ae5dae/033cb8a3070931c01/d007.html

    Has someone experience with flashing the stock ecu to delete the speed limiter and make the cr running betteand faster?

    Jan
    Last Edit: April 02, 2015, 01:53:01 pm by jan1195xx

  • Offline kiko

    • Crossrunner Pro  ‐    154
    • ***
      #1

    Offline kiko

    • Crossrunner Pro
    • ***
    • Posts: 154
    • Bike: CR
    • City / Town: Toledo
    • Country: Spain
    Re: OBD Tool
    Reply #1 on: March 11, 2015, 09:21:30 am
    March 11, 2015, 09:21:30 am
    Nice toy Jan.
    Unfortunately I have not experience flashing the speed limiter parameter, but I think it is an excellent idea. Good luck with your aim. I do not like this parameter.

    As probably you know in the forum there are some post about next tool to obtain a similar result you are looking for:
    http://www.thurn-motorsport.de/html/motor-rc60.html

    Regards
    Kiko.

  • Offline jan1195xx

    • Ex Member
    • Crossrunner Member  ‐    78
    • *
    • Topic Author
    • #2

    Offline jan1195xx

    • Ex Member
    • Crossrunner Member
    • *
    • Topic Author
    • Posts: 78
    Re: OBD Tool
    Reply #2 on: March 11, 2015, 10:12:23 am
    March 11, 2015, 10:12:23 am
    I know the boxes from thurn and other honda dealers, but when there is a chance to flash the stock ecu, nobody can see it. I know, there are some offers for ecu flashing for the 1200 VFRs and also for the older 800 VFRs, but i have to ask for our CR. When i have some news, i will post it here.


    Jan

  • Offline kiko

    • Crossrunner Pro  ‐    154
    • ***
      #3

    Offline kiko

    • Crossrunner Pro
    • ***
    • Posts: 154
    • Bike: CR
    • City / Town: Toledo
    • Country: Spain
    Re: OBD Tool
    Reply #3 on: March 12, 2015, 09:03:27 am
    March 12, 2015, 09:03:27 am
    *Originally Posted by jan1195xx [+]
    . . . but when there is a chance to flash the stock ecu, nobody can see it.

    I did not know that.

    *Originally Posted by jan1195xx [+]
    . . . but i have to ask for our CR. When i have some news, i will post it here.

    Thanks very much Jan

    Regards
    Kiko.

  • Offline jan1195xx

    • Ex Member
    • Crossrunner Member  ‐    78
    • *
    • Topic Author
    • #4

    Offline jan1195xx

    • Ex Member
    • Crossrunner Member
    • *
    • Topic Author
    • Posts: 78
    Re: OBD Tool
    Reply #4 on: April 02, 2015, 01:52:36 pm
    April 02, 2015, 01:52:36 pm
    I have been in contact with ignitech, a firm, that makes ecu for many bikes. They can make a programmable ecu for the CR, only failure is, that the information for fuel consumption and operating km range is not available. But you can use a wide band lambda controller with this ecu and make a mapping on a dyno or do it youself on the computer. Comes for stock wiring harness and plugs. For informations about ignitech have a look at the website:
    www.ignitech.cz
    There is also a pricelist. ECU comes 483,-, Wide band controller WB2 (programmable) 141,- euros (incl. VAT of 21%). If you order the ecu and the controller you will get a discount of 15% of both parts.

    Jan

  • Offline kiko

    • Crossrunner Pro  ‐    154
    • ***
      #5

    Offline kiko

    • Crossrunner Pro
    • ***
    • Posts: 154
    • Bike: CR
    • City / Town: Toledo
    • Country: Spain
    Re: OBD Tool and Ignitech ECU
    Reply #5 on: April 03, 2015, 04:07:52 pm
    April 03, 2015, 04:07:52 pm
    Thanks Jan
    Kiko.

     



    recent